F. Arthur Uebel

Mantenimiento

Si tiene preguntas sobre los instrumentos de F.A. Uebel, llámenos:

+49.(0)611.950 89-0

Asamblea

1
To facilitate assembly, apply some cork grease on all cork pivots.
2
With a slight twisting motion, insert the barrel on the top joint of the clarinet. Make sure that you do not press too hard on the keys.
3
In the same way connect the top piece with the bottom piece. When assembling the top and bottom piece make sure that both roller keys (B and cis-) and the G-sharp key do not touch.
4
Assemble bottom piece and bell with slight twisting motions.
5
Carefully twist and turn the mouthpiece on the barrel. Make sure that the flat side of the mouthpiece and the underside of the clarinet are aligned.
6
Use the ligature to fasten the reed in this position. The reeds tip must not be damaged in any way.
7
Your clarinet is now ready to play.

Instrucciones de cuidado

Para evitar grietas, no debe exponer el clarinete a sequía ni calor extremos. Lo óptimo es una temperatura de 20° C y 40-60% de humedad.

1
Keep your reeds safely in a suitable reed Case. All Vandoren reeds are delivered in a suitable single case.
2
After playing you should wipe the keys with a cloth. If they are heavily-soiled or tarnished, please use the enclosed silver cloth.
3
After playing wipe the inner bore of the clarinet with the swab to remove the moisture.